ZEMIX MARKETING (M) SDN BHD - (1169533-W)

SKIM COAT FINISH PLASTER  is a superior quality cementitious finishing plaster suitable for internal skimming on concrete wall surfaces and ceiling plaster. It is designed to provide a smooth durable finish with excellent adhesion strength. 

Simply add water and mix with a mechanical mixer to get a homogenous paste that gives good workability on both vertical and overhead surfaces.

 

SKIM COAT FINISH PLASTER  is special formulated for high quality, it is good to finish on concrete surfaces such as column, beam, stab, lightweight block wall and to finish plaster surfaces. It contents additive that improve workability, consistency, water retentively and bond strength. It should not apply on all painted surfaces.

 

BENEFITS

 

• Easy to use, just mix with water.

• High bonding strength.

• Minimize shrinkage cracking.

• High durability.

• Good weather resistance.

 

DIRECTION FOR USE

 

Surface Preparation - All surface must be structurally sound, clean, and free from dust, or others foreign materials that effect adhesion and bonding. For dry or high absorbing substrates, pour the surfaces with water prior.

 

Mixing Application - Add 40 kg of SKIM COAT FINISH PLASTER with 12 to 13 litres of water. Mix thoroughly with an electrical mixer or manually for about 3 to 5 minutes until the desired homogeneous paste is obtained.

 

Application - Apply with using a steel trowel or spray machine.

 

PACKAGING - Available in 40 Kg.

 

SHELF LIFE -  Up to 12 months in unopened bags and containers stored in a dry elevated position.

 

TECHNICAL INFORMATION

 

• Appearance  -  Grey

 

• Water/powder ratio - 12 to 13 litres of water per 40 kg/bag

 

• Compressive Strength  - 7 - 12 N/mm2

 

• Tensile Adhesion Strength - Average Strength >0.75 N/mm2

 

• Recommended Thickness  - 1 to 5 mm per layer

 

• Coverage  - Approximately 28 to 34 m2/mm/40 kg

 

• Additive  - Polymer to improve workability, water retention and adhesion