top of page

DREB RENDER (DR 107)

DREB RENDER is a based on traditional formulation with high performance premixed plaster. It is for plastering work on concrete surfaces, brick wall and block wall that provides superior bonding and excellent strength to the substrate. 

 

DREB RENDER comprises of Portland cement, Graded sand, polymer, chemical additive and it is specially formulated with recycled material and approved by Singapore Environment Council under their Green Label Scheme as a sustainable building material for Green Buildings.

 

DREB RENDER is highly recommended for bedding, joint mortar for brickwork and block work, backing and bedding for wall tiles. It is also suitable for all types of concrete substrates, lightweight block, brick wall and block wall.

 

BENEFITS

  •   Approved by Singapore Eco label authorities. 

  •   Minimize shrinkage cracking.

  •   Good weather resistance and high durability. 

  •   Excellent bonding strength.

  •   Premixed to ensure good consistent quality. 

  •   Consistent quality.

  •   Convenient in placing, handling, mixing and application.

 

DIRECTION FOR USE

 

Surface Preparation -  Surface of substrates should be clean and remove all from oil, grease, dust and others contaminants. Dry substrates should be dampened before application of RENDER.

 

Mixing Mix -  DREB RENDER  should use the clean water and mix thoroughly using a hand-held or mechanical mixer for 3-5 minutes until a desire homogenous mix is achieved and ensure the mix is free from lumps. The mix ratio is to add approximately 5.8 – 6.5 litres of clean water to 40 kg bag of RENDER.

 

Application Method -  RENDER should applied by use a steel trowel or spraying machine. The first coat should have application thickness not exceeding 8mm. After curing, please place under shaded ambient condition for at least 3-4 hours before the second coat is applied.

 

POT LIFE - Approximately 40 – 60 minutes after mixing.

 

PACKAGING - One bag of DREB RENDER is packed in 40 kg

 

SHELF LIFE -  Shelf life up to 12 months from the date of production. It must store in dry place free from moisture contact in original sealed packing.

 

TECHNICAL INFORMATION

 

  • Appearance  - Grey

 

  • Water/powder ratio  - 5.8 – 6.5 litres of water per 40 kg bag

 

  • Tensile Adhesion Strength -  â‰¥ 0.8 N/mm² (14 days)

 

  •  Binder -   Portland Cement

 

  •  Filler Material  -  Graded Sand

 

  •  Additives -  Polymers to improve workability and water retention

 

  • Recommended Thickness -  8mm – 15mm per layer of application

 

  • Coverage  -    Approximately 26 - 30m² /mm/ 40kg bag

 

  • Shear Adhesion Strength -    â‰¥ 1.00 N/mm² (14 days)

     

     

     

     

     

     

     

     

     

bottom of page